Siser TTD Mask has a medium tack adhesive that is formulated to work with ALL of Siser's ColorPrint™ digital materials.
Listing is for 1 x 30cm x 30cm piece
How to use:
Cut a piece of mask slightly wider than the image to cover.
Remove the paper backing from the mask and set it aside.
Adhesive side up, place the mask down on a smooth, firm surface.
With the image facing down, centre it over the mask letting the middle drop down onto the adhesive, followed by the rest of the image.
Place your squeegee at a 45° angle over the centre of the image. Using firm pressure, push the squeegee towards the outer edge of the image.
This removes any trapped air creating a bond between the image and the mask.
Repeat this process in several directions.
Lift a corner of the mask, use a steady motion to separate the mask from the image.
Place the transferred image back on the shiny side of the original masking paper you had set aside.